Metal Table Edging : Metal Banding, Counter, Bar Top

Here you will find our selection of Metal Banding's and T Molding.  We use this polished chrome banding for our custom tables and countertops.  You can choose from whichever you think will look best with your table.  We offer our banding for sale in 12 foot lengths.  Click on any photo below for detailed information on pricing and shipping.

Table and Counter Metal Edging

Shown below is our standard metal banding.  For all (except Insert Banding), a 1/16 inch slot cutter is required if you are installing this banding yourself.  All banding is sold in 12 foot lengths.  Please note we have a 2 strip minimum order!  For shipping via UPS (most economical), we can cut the banding down to two pieces - one 8' and one 4', or 6' and 6' (a $15 cutting fee applies).  If you want to the full 12 foot length shipped to you, we will send it via freight company (a little more expensive unless ordering quantities).  If you wish to place an order for our metal banding, send an email or call 1-800-507-7632.   Click Here for Installation Instructions

 
3/4 inch Metal  Banding 1.25 Inch Metal Banding 1.5 Inch Metal Banding 2.25 Inch Metal Banding Insert Banding  
  3/4 Inch 1.25 Inch 1.5 Inch 2.25 Inch 3" Insert Banding  
    Available in GOLD Available in GOLD Available in GOLD    

Insert Groovy Banding

Our Insert Banding makes for a great look on just about any table.  Groovy insert banding screws into place, and has two slots into which we insert matching vinyl or laminate, which covers the screw holes!  You may choose from a wide variety of colors to match your table top or chairs.  Click on any of the photos below for additional information on our custom insert groovy banding. Or call 1-800-507-7632.

Insert Groovy Banding Insert Banding Black Insert Blue Insert
click photo for details click photo for details click photo for details click photo for details
Green Insert Red Insert Black Insert Blue Insert

Metal Striping - Not For Table Edging

We have compiled a great selection of Accent Banding to complete your project!   Sold in 12 foot lengths, and please note we have a 2 strip minimum order!  For shipping via UPS (most economical), we can cut the banding down to two pieces - one 8' and one 4', or 6' and 6' (a $15 cutting fee applies).  If you want to the full 12 foot length shipped to you, we will send it via freight company (a little more expensive unless ordering quantities).  If you wish to place an order for our metal banding, send an email or call 1-800-507-7632.

Accent Flat Metal Banding



Available in GOLD
1-1/2 inch Flat Metal Banding
3/4 inch Flat Metal Banding
 

Click image above to view a side profile
Click image above to view a side profile
Click image above to view a side profile
1-1/4 inch Half Round Metal Banding
1/2 x 1/2 inch Angle Metal Banding
 
Click image above to view a side profile
Click image above to view a side profile
Click image above to view a side profile
Click image above to view a side profile
Edge Molding - 7/8 inch with Lip
Outside Corner Metal Banding - Insert
 

 

Click image above to view a side profile
Click image above to view a side profile

Connector Molding

 
Click image above to view a side profile
Click image above to view a side profile
Click image above to view a side profile
Click image above to view a side profile
Inside Cove (1 Leg) Metal Banding - Insert
1/4 x 1/4 inch Inside Cove Metal Banding
 

To place an order for our metal banding, call: 1-800-507-7632

Let Us Build Your Kitchen Counter Top

Looking to replace that kitchen counter top?  We can build you a brand new top ready for you to install.  If you are local to our shop, we also offer home installation.  If you are interested in have a custom counter top built, fax a drawing with dimensions to the following number: 304-728-8465.  Include your email address or phone number and we will provide a quote within 48 hours.  We specialize in the retro look but can provide you with any look you choose.  Take a look below to see some examples.

  Anne's Retro Kitchen

 

Retro Counter Top

Modern Counter Top

Gray Cracked Ice Retro Top

Red Cracked Ice Insert Back Splash

Steve's Retro Kitchen

Gray Cracked Ice Window Ledge with Metal Banding

Steve's Retro Kitchen

Customer Retro Counter Tops Done Right

 

Visit Our Showroom In Charles Town WV

Our 4,000 square foot retail store offers a first hand look at our custom Retro Furniture and Vintage Machines.  We try to keep a bit of everything on our showroom floor, including Custom Bars, Retro Leaf Tables, Diner Tables, Kitchen Tables, Barstools, Chairs, and Diner Booths.  We also offer our Class A restored Vintage Vending Machines including Soda Machines, Coke Machines, Candy Machines, Juke Boxes, CD Juke Boxes, Soda Chests, Gas Pumps, Kiddie Rides, and Video Games.  Our showroom is located in Historic Charles Town, West Virginia, only one hour from Washington, DC or Baltimore.  We are open to the public Monday thru Friday from 10am till 5pm.  We are open on Saturday from 10am till 4pm.  We are closed on Sundays.  Click here for driving directions!

BarsandBooths.com Inc
Copyright © 2006 BarsandBooths.com Inc. All rights reserved.

About Us - Retro Furniture - Diner Booths - Barstools - Chairs - Car Seat Sofas - Bars - Customers - Soda Machines - Gas Pumps - Popcorn Machines - Pinball Games - Pub Tables - Retro Leaf Tables - Boomerang Laminate - Metal Banding - Testimonials - Rooms Featured On - Commercial Customers - Juke Boxes - Modular Booths - Black Light Posters - Vintage Telephones - Reproduction Signs - Bar Options - Quality Workmanship - Vinyl Color Choices - Kitchen Tables - Clearance Specials - Furniture Specials - Machine Specials - Coke Products